IDEAL COMPLETE JOB SUPPLY KIT

The IDEAL COMPLETE JOB SUPPLY KIT comes with the necessary supplies to accommodate each layer of a 3-coat epoxy and urethane floor project for a standard garage, basement and more!

Assembled in one box as an easy grab and go kit for any Contractor or DIY person to complete their project and not have to worry about getting the right supplies together for the job because "It's all in the box!"  These supplies are common as one time use products for standard epoxy floor projects.

Contents in the box:

Tarp (1)- First set up your mix area by placing the tarp on the ground to provide plenty of room to set up your mix area and help keep your jobsite clean and better organized.

Blue Tape (1)- Most projects need some type of masking over objects, bottoms of walls, doorways, etc, to help keep the job neat and clean, and keep the resin materials from getting on them.

5 Gallon pails (3)- Use a clean 5 gallon pail to mix each coat of epoxy, poly or urethane liquid for the floor being coated.

2 1/2 Quart cups (6)- Use the 2 1/2 quart metering pails to measure your A & B for each mix, and to measure small quantities as needed. 

1 Quart cups (3)- Use the 1 quart metering cups for small quantities, or to pour resin into for a helper to cut in the edges of the room.

2" Chip Brushes (6)- For each layer of epoxy, a 2" chip brush is used to cut in the edges and inside corners of the perimeter of the room of the floor being coated, as well as any fixed objects such as a post, steps, cabinets, etc.

9" Roller Covers (3)- For each layer of epoxy and urethane, a new 9" roller cover is used.

9" Roller Frame (1)- Used with the 9" roller covers  to smooth out the epoxy and urethane liquids along the edges and corners of the floor being coated, and/or to help in creating designs in Metallika XP epoxy floors.

18" Roller Covers (3)- For each layer of epoxy, an 18" roller cover is used to help disperse the resins and achieve a smoother floor.

End Caps (6)- Used inside the ends of the 18" roller covers to center them onto the 18" frame.

18" Roller Frame (1)- Used with the 18" roller covers and end caps.  This frame is a very sturdy and long lasting frame, and your roller covers do not come loose while you work.  Use them to smooth out the resin liquids across the large areas of open space, or "the field" of the floor being coated.

Small tip:  When done with your rollers, immediately place them inside a plastic trash bag before walking off of the floor.  Have a helper grab the bag to carry it to your tarped area.  This avoids drips from being tracked across areas that are supposed to be kept clean. The helper can then grab and pull the roller covers off of the roller frame or roller cage by gripping them from the outside of the bag and not have resin dripping all over the tarp or all over their hands. The used roller covers are now in the trash where they belong.

Order these supply kits by the pallet and save more money by buying in bulk.  Grabbing a to go box per job really makes it easy to start the day and not have to worry at all that you don't have everything you need when you get to the jobsite!

If there are additional items we have that your company uses and you would like to customize your Job Supply Kit, send us a contact message and let us know and we will help accommodate.  We can also place your company brand on the buckets and boxes for an even more professional appearance when others see you on the job.  Find our contact form at the bottom of our home page.

WE ARE HERE TO HELP YOU THE CONTRACTOR, MAKE MORE MONEY.