IDEAL URECRETE CEMENT SL BASE (QTY: 1) UNPIGMENTED

PRODUCT DESCRIPTION: IDEAL UreCrete Cement SL Base is a bio-based three or four component (dependent on color) urethane slurry that has outstanding wear performance and can withstand higher heat exposures than typical unmodified urethanes. The product has good thermal shock capabilities and is a good choice for hot wash down areas. The product is resistant to MVT and withstands moderate thermal shock, impact, abrasion and chemical exposures.

RECOMMENDED FOR: Resurfacing areas where a durable shock resistant surface is needed such as commercial kitchens, restrooms and locker rooms, food prep areas, and food and beverage facilities.

BENEFITS: *Seamless hygienic finish with no grout lines. *Low odor, fast installation and fast cure. *Thermal shock and chemical resistance.

SOLIDS BY WEIGHT: Approximately 97% solids (liquids mixed with aggregate) VOLATILE ORGANIC CONTENT: 5 grams per liter

STANDARD COLORS: Gray, tan and red. (Special colors available with minimum quantities.)

FILM THICKNESS: Final film thickness varies, dependent on concrete conditions and system used. Typical finished installation thicknesses vary from 1/8" to 3/16” dependent on broadcast aggregate and topcoats.

COVERAGE PER KIT: The standard kit (approximately 0.39 cu. Ft.) typically yields 37-46 square feet per kit at approximately 1/8".

PACKAGING INFORMATION / MIX RATIO: Urethane Cement: (7.25# part A in a gallon container, not full + 7.25# part B in a gallon container not full + 1 bags blended aggregate at 29# and 1# bag of dry pigment (weights approximate) Qty: 1